TR
  1. Home
  2. Products
  3. PowerBOX 3Px

PowerBOX 3Px

NETIO PowerBOX 3Px is a professional electrical socket device with 3 outputs and LAN connectivity. Each output socket can be separately switched on or off over the web interface. Integration into third-party systems using various protocols (JSON, Modbus/TCP, SNMP, MQTT-flex, Telnet, ...) is easy thanks to the open API. With the NETIO Cloud service, the outputs can be controlled from anywhere. The NETIO Cloud service, provided for a fee, uses SSL security and servers in Europe.

NETIO PowerBOX 3Px can be configured with a web browser (allows output control, connection to NETIO Cloud, Open API communication settings, etc.).

PowerBOX 3Px is a smart IoT LAN power socket in the form of an extension cable. A RJ45 Ethernet cable is used to connect to the LAN.

PROFESSIONAL PRODUCT

NETIO PowerBOX 3Px is suitable for industrial applications. The product works in a wide temperature range (–20°C to +65°C), supports firmware upgrades over the web, remembers the last socket states before being powered off, and its relays switch at zero voltage.

TYPICAL APPLICATIONS

  1. Each electrical socket can be separately switched on or off from the product’s web interface.
  2. The outputs can be controlled with an Open API (JSON, Modbus/TCP, SNMP, MQTT-flex, Telnet, ...)
  3. The device can work with various third-party programs and applications (NETIO Drivers).
  4. The power sockets can be controlled using the NETIO Mobile 2 app (Android), as long as the app is connected to the same network.
  5. The power sockets device can be connected to the NETIO Cloud service (for a fee).

PRODUCT COMPARISON

Connection Switched Outputs Metered Channels Smart Switching Inputs NFC Web Interface NETIO Cloud Lua scripts WatchDog function Scheduler function Mobile App HTTPs Open API
PowerPDU 4C 2xLAN 4xC13 4 ZCS RS-232 - YES YES YES YES YES iOS + Android YES 15 protocols
PowerPDU 4PS LAN 4xC13 - ZVS - - YES YES - - YES Android - 10 protocols
PowerPDU 8QS LAN 8xC13 1+1 ZVS 1xDI - YES YES - - YES Android - 10 protocols
PowerPDU 4PZ LAN WiFİ 2+2 2 ZCS / - 2xDI (S0) YES YES YES - - YES Android - 10 protocols
PowerPDU 3Px LAN 3x - ZVS - - YES YES - - YES Android - 10 protocols
PowerPDU 4Kx LAN 4x 4 ZCS - - YES YES - - YES Android - 10 protocols
PowerCableRES
T101x 		WiFi 1x 1 ZCS - YES YES YES - - YES Android - 10 protocols

TECHNICAL SPECIFICATIONS

OPEN API: SUPPORTED M2M PROTOCOLS

The open API can use one protocol at a time, chosen from among the supported M2M protocols:

Modbus/TCP  AN27, AN22 AN37
MQTT-flex AN40
Telnet AN10
http URL API  AN19 AN29
JSON over HTTP (default) AN21, AN30 AN42
http Push JSON
http Push XML
XML over HTTP AN20 AN31
SNMP v1 AN11 AN41
SNMP v3

The SNMP protocol can be always used in parallel to other APIs.

Regardless of the Open API used, the PowerBOX 3Px can be always controlled from its web interface and from the NETIO Cloud service. The customer may use one Open API protocol and the NETIO Cloud service simultaneously.

Useful links:

APPLICATIONS::

NETIO usage examples

POWERBOX 3PX (3PF / 3PE / 3PG)

“3Px” is an overall designation of products with 3 different types of electrical sockets offered by the NETIO products company.

When ordering, please choose one of these three types:

  • PowerBOX 3PF
    DE (Type F – Schuko) socket is used in most of the continental Europe and can be used in Russia.
  • PowerBOX 3PE
    FR (Type E) socket with an earth pin is needed in France, Belgium, Czech Republic, Slovakia and Poland.
  • PowerBOX 3PG
    UK     (Type G) socket and plug for the United Kingdom, Ireland and other countries.
NETIO CLOUD

NETIO CLOUD

This product can be connected to the NETIO Cloud service (100 outputs can be controlled from 1 web screen). NETIO Cloud is an ideal solution for remote control and restarting.
The paid NETIO Cloud service is operated by NETIO products a.s. as a support for manufactured equipment.

  • All products manufactured by NETIO products can be connected to NETIO Cloud.
  • The user can control connected devices securely via the web from anywhere (HTTPs).
  • The first 3 years are free connection to the service thanks to the "Welcome credit".
  • NETIO Cloud can be used in parallel with other Open API protocols.
  • Secure device communication to the Cloud service (port 8883 - MQTTs - TLS)
  • NETIO Cloud has its own Open API, which can be used to control all devices in a specific user account (MQTTS protocol).
More about NETIO Cloud service
INDUSTRIAL PRODUCT QUALITY

INDUSTRIAL PRODUCT QUALITY

NETIO sockets are made with quality in mind. Each unit includes a set of supporting functions to ensure reliability and long service life of the product in real-life conditions.

  • Open M2M API
  • Wide operating temperature range (–20°C to +65°C)
  • PowerUp state – defined output state after power-up
  • PowerUp delay (outputs switched on after a delay)
  • Firmware upgradeable over the web, backwards compatibility
  • IOC – Independent Output Control
  • ZVS – Zero Voltage Switching
ZVS (ZERO VOLTAGE SWITCHING)

ZVS (ZERO VOLTAGE SWITCHING)

An important feature of the NETIO PowerBOX is ZVS (Zero Voltage Switching).
ZVS controls the exact time when the mechanical relay contacts close and open. The relay contacts switch the output on or off when the voltage crosses the zero level. 

  • In the long term, ZVS support reduces the product failure rate due to internal relay damage.
  • Since the relay switches when the sinusoidal voltage waveform crosses the zero level, negative effects of inrush current are significantly reduced.
  • The ZVS and PowerUp delay functions reduce the chance of circuit breakers tripping when power is restored after an outage.
  • ZVS extends the lifetime of connected equipment, especially in case of frequent on/off switching of devices that are not designed for that (such as switching power supplies).
Glossary: More about ZVS
POWER-UP STATE

POWER-UP STATE

For some applications, it is important to set the power socket state immediately after the device is powered on (or the power is restored after a failure). With some machines it is important to avoid momentary switch-on or switch-off. This parameter therefore defines the behavior of the 110/230V output power socket before the standard communication with a master system starts to work.

  • On
  • Off
  • LAST state restores the last state before the power was disconnected
Glossary: PowerUp state
MOBILE APPLICATION

MOBILE APPLICATION

PowerBox 3Px can be controlled over the local network using the NETIO Mobile 2 app (for Android mobile devices).

  • The mobile app can be used to control several devices and all their outputs.
  • The mobile device must be connected to the same LAN (via WiFi).
  • NETIO Mobile2 can scan the LAN and discover connected devices. WiFi connection to the LAN is required.

NETIO Mobile 2 is not available for iOS users. We recommend using third-party apps:

NETIO Mobile 2
SCHEDULER (TIMED SWITCHING OF INDIVIDUAL OUTLETS)

SCHEDULER (TIMED SWITCHING OF INDIVIDUAL OUTLETS)

The switching of outlets can be time-controlled by the Scheduler with a graphical interface. Switching on/off at specific times can be easily configured.

  • Each output can have its own schedule, according which the output is switched
  • While Scheduler (calendar) is running, the output can be controlled from NETIO Cloud, web interface or Open API
  • The Scheduler does not require an internet connection (requires a time source – NTP server – for example a local ADSL / WiFi router)
More information about Scheduler

GENERAL PROPERTIES

  Switched
Power
Outputs 		Output
Switching 		Metered
channels 		LAN WiFi IQRF Web NETIO Cloud Scheduler Mobile App Open API Max. current
per socket
PowerBOX 3PF 3 x DE
(Type F) 		ZVS - 1 - - Yes Yes Yes Android 10 protocols 230V / 16A
PowerBOX 3PE 3 x FR
​(Type E) 		ZVS - 1 - - Yes Yes Yes Android 10 protocols 230V / 16A
PowerBOX 3PG 3 x UK
​(Type G) 		ZVS - 1 - - Yes Yes Yes Android 10 protocols 230V / 13A
PowerBOX 4KF 4 x DE
(Type F) 		ZCS 4 1 - - Yes Yes Yes Android 10 protocols 230V / 16A
PowerBOX 4KE 4 x FR
​(Type E) 		ZCS 4 1 - - Yes Yes Yes Android 10 protocols 230V / 16A
PowerBOX 4KG 4 x UK
​(Type G) 		ZCS 4 1 - - Yes Yes Yes Android 10 protocols 230V / 13A
PowerCable REST 101x 1
(5 types) 		ZCS 1 - Yes - Yes Yes Yes Android 10 protocols 230V / 10-16A
PowerCable IQRF 901x 1
(3 types) 		ZVS 1 - - Yes - - - - IQRF 230V / 10-16A

FAQ

Yes. When the PowerBOX is powered up, all outputs are set according to the PowerUp Init configuration (On / Off / LAST value). The parameter can be set in the web interface in the detailed configuration for each output.

To reset the product to factory defaults, press and hold the button next to the RJ45 jack. Keep the button pressed and plug in the product. Still keep the button pressed. About 12 seconds after powering up, the yellow LED flashes 3 times and factory default settings are restored (Load to defaults). For the current procedure, see the supplied QIG (Quick Installation Guide) for the product. It is available for download at this page as well as included in the product package.

For Android mobile devices, please upgrade to NETIO Mobile 2. For iOS mobile devices, NETIO mobile app upgrade is not available yet.

Yes, the “Short OFF” command (accessible for instance in the PowerBOX 3Px web interface) can switch the power to the device off for e.g. 5 seconds and then switch it on again automatically. Typical applications include the remote restart function, where the user needs to send, over the Web or via the URL API, a command that momentarily switches the output off and then switches it back on. This is typically used to restart a LTE / WLAN modem; the PowerBOX controls the power to the modem.

Yes, NETIO PowerPDU 3PX supports the Scheduler (calendar) function. If Scheduler function is not available in your device, update your firmware to highest possible version.

Yes. PowerBOX 3Px includes an open API. We are continuously publishing ANxx (Application Notes) that describe how to connect the product to various third-party systems.

MQTT-flex is a NETIO extension of the standard MQTT protocol. The extension uses a configuration text file to specify the MQTT message structure, the MQTT broker address where messages are sent, and the periodicity. In this way, a complete configuration of the MQTT communication can be transferred in a single text file.

VIDEO

Contact Us

Ortaköy Industrial Zone, Ilter Blvd, Yeldeğirmeni Ave. Mor Menekşe St. No:5 Selimpaşa / Silivri
ISTANBUL / TURKEY

export@temteknik.com